Protecting Your Investment: Care Tips for Best Swiss Watches

Best Swiss Watches
Best Swiss Watches Replica WatchesLeave a Comment on Protecting Your Investment: Care Tips for Best Swiss Watches

Protecting Your Investment: Care Tips for Best Swiss Watches

Introduction

As we all know, watch repairs can be very expensive and time-consuming, and this is true for even the best Swiss watches. After spending a significant amount on a beautiful Swiss watch, the last thing you want is to incur additional costs due to improper care.

While some ways to avoid damaging a watch are obvious—like not hitting it with a hammer or scraping it against a wall—other potential hazards might not be so apparent. It’s always crucial to read the watch’s instruction manual or conduct some online research before handling it.

In this blog, we aim to help you protect your best Swiss watches. We have listed the most common things that you may not know can damage your watch and how to prevent this from happening.

1. Cross-threading the Crown

A screw-in crown maintains the watch’s water resistance by keeping the stem snug in the sealing gasket. After winding or setting a watch, it’s essential to screw the crown back in correctly.

Why is this happening?

If the crown is not screwed back properly or at the correct angle, it can allow water to enter the movement and dial. However, avoid screwing the crown too tightly—this applies when opening the crown as well. This ensures that the crown does not get jammed or misaligned.

How to Prevent This:

Treat the crown delicately. It should rotate at least 1.5 full turns, up to 3. If it stops quickly (under one full turn), do not force it. Unscrew the crown fully and try again. Remember, you don’t need to screw the crown in too tightly, as over-tightening can make it nearly impossible to unscrew later.

2. Magnetization

Small metal parts in a watch movement can become magnetized, particularly if you leave your watch near devices with strong magnetic fields, such as stereo speakers or smartphones.

What Happens to the Watch?

A magnetized watch’s escapement can behave erratically or even seize up, causing the watch to gain or lose many seconds or minutes per day.

How to Prevent This:

Avoid placing your watch near electronic devices, radios, or speakers. Some watches are designed to withstand high magnetic fields, like the Rolex Milgauss and Omega Seamaster Aqua Terra. Watches with high anti-magnetic features are labeled with their Gauss rating, which measures magnetism resistance.

3. Improper Storage

Proper storage is crucial for maintaining your watch’s longevity.

Whyis this happening?

Extreme temperatures can damage the movement and gaskets. Heat can dry out the lubricant or cause it to congeal, creating friction on the gears. Quick transitions between hot and cold can cause parts to expand and contract, leading to water vapor entering and causing damage.

How to Prevent This:

Store your watch at room temperature. Use a watch box to keep it safe when not in use. If it’s an automatic watch, consider using a watch winder.

Conclusion

By following these simple guidelines, you can extend the life of your best Swiss watches and avoid unnecessary repair costs. Proper care and storage will ensure that your investment continues to look great and function accurately for years to come.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top